Put 24 suction nozzles in one time automatic Nozzle Cleaner wash a large amount
Features:
- No cleaning solution required
- Low noise
- High efficiency and energy saving
- 24 suction nozzles cleaned at a time
| pressure | pressure | compressed air |
| Intake pressure setting | 0.5～0.55MPa |
| Injection pressure setting | 0.35～0.38MPa |
| Nozzle injection pressure | ≤0.4MPa |
| Tube | Intake manifold | ￠12tube |
| Drain tank water pipe | ￠8tube |
| Cleaning liquid | Cleaning liquid | Industrial deionized water |
| Liquid consumption | ≤300cc/h(5cc/min) |
| Capacity of water storage tank | 1200cc |
| Power Supply | Power Supply | AC220～240V |
| Plug | 3-Pin |
| Consumption of electricity | ≤0.1Kw |
| Environment | Working environment temperature | -5℃～ (But not frozen.) |
| Liquid temperature | 0℃～ (But not frozen.) |
| Working environment humidity | 10～60%RH |
| Environmental humidity of equipment | 10～60%RH |
| dust | 0.1mg/m³(No conductive dust) |
| Corrosive gas | Not allow |
| Others | Outline size | 655(L) x 560(W) x 475(H) |
| Weight | (Including cleaning fluid 2000cc) |
Functional features:
- Put 24 suction nozzles in one time, please wash a large amount;
- Thoroughly solve the dirt and impurities which are difficult to be cleaned by ultrasonic;
- It will not be unclean due to the smaller and smaller diameter of suction nozzle;
- Cleaning more thoroughly and directly extend the life of suction nozzle;
- No damage to the surface coating and reflection plate of suction nozzle;
- Clean with deionized water or distilled water;
- Automatic continuous cleaning, automatic drying;
- Simple and convenient operation;
- Intelligent water storage inspection function added
- Suitable for all kinds of mounter.
Comparison with traditional cleaning:
1. Manual air gun
- The efficiency of manual cleaning is low, the surface and lumen of suction nozzle cannot be cleaned, and the inner hole is easy to be damaged by steel wire poke;
- The cleaning effect is different;
- The use of cleaning solution and alcohol may cause the reflection layer to fall off.
2. Ultrasonic cleaning
- Low cost and high efficiency;
- During the cleaning process, it is easy to cause the collision between the suction nozzles, resulting in the damage or fall off of the black coating on the surface;
- The cleaning solution causes damage to the surface coating of the suction nozzle and greatly shortens the service life of the suction nozzle;
- The surface and lumen of suction nozzle cannot be completely cleaned;
- For the latest 01005 and 0201 nozzles, they can not be cleaned very well, mainly because the inner hole of the nozzle is too small, which will cause the vacuum bubble to be produced and cannot be discharged during ultrasonic cleaning, so the cleaning is not clean.
Economic benefits:
Reduce the purchase cost of suction nozzle; after using sme-24 cleaning machine, it can solve the problem of too dirty suction nozzle and scrap, so as to extend the service life.
Reduce unnecessary labor; because the machine adopts automatic cleaning, no special person is responsible for it, and the whole process is automatically completed by the machine.
It can effectively reduce the defective rate of products and improve the productivity of SMT. In the production process, a large part of it is caused by the uneven dirt on the surface of the suction nozzle and the dirt in the inner cavity, resulting in the throwing or mounting displacement, resulting in poor subsequent welding. After using the cleaning machine, the suction nozzle can always be protected in a new state, greatly improving the production efficiency.
Our advantage
ETON is the pioneer of SMT machine field in China which have more than 11 years experiences. And owned CCC, SIRA, CE certificates with 9 invention patents, 112 practical patents, 12 software copyrights of intellectual property technologies.
Oversea market:The products exported to more than 30 countries and regions, including South Korea, India, Vietnam, Tunisia, Egypt,Turkey, Russia, Brazil etc.
Market
Our products had exported to more than 30 countries and regions, including South Korea, India, Vietnam, Tunisia, Egypt,Turkey, Russia, Brazil etc. And here are some of our big customers:
SURYA, POLYCAB, FIEM, RK, GK, TECHNO LED, CALCOM, ACK , KENDAL, RangDong, UNISTAR, and so on.
Packages
Our package step is follow the blowing:
STEP 1: Film packaging to prevent the dust and water;
STEP 2: Packing in a foam cotton stretch a film to protect the outside of the machine;
STEP 3: Vacuum paper package and moisture proof bag, to keep dry during the transportation;
STEP 4: Equip with sturdy wooden boxes to ensure the safety of the machine, then transportation by trucks to the specified port.
Delivery: by sea, air, land transport.
Service
Pre-sale service
Provide suitable production plan
Advise on plant electrical equipment and layout
Sale service
Report machine status in time
Follow up and send test machine video
After-sales service
Software lifetime upgrade
24 hours to deal with problems online
Engineers can arrive on site to teach operation and debug the machine
Regular visit (one year warranty period, spare parts repair free; Once or twice a year after warranty)
Contact me:
Whatsapp/Wechat: +8613632769526
Email: Noah@eton-mounter.com
|
|
Put 24 suction nozzles in one time Automatic Nozzle Cleaner wash a large amount Images
|
