led tube light manufacturing machine with 180K CPH led smd machine
Techincal parameter
| High Speed SMT Machine HT-F7S |
| Dimension | 2700*2300*1550mm |
| Total Weight | 1700kg |
| PCB Clamping | Adjustable pressure pneumatic |
| Mounting Mode | Group pick and group place |
| Mounting Precision | ±0.02mm(Repeat precision) |
| Mounting Height | ≦5mm |
| No. of Camera | 5 sets ( Digital camera) |
| Vision alignment, MARK correction |
| Power Consumption | 6kw |
| Operating Environment | 23℃±3℃ |
| Transmission Direction | Single(left→ right or right→ left) |
| Transmission Mode | Online drive |
| Electrical control | Independent research and development by ETON |
| Motion control card module 1 set | Independent research and development by ETON |
| Feeding way | Electric feeder with double motor |
| PCB Length Width | Max:1200*330mm Min:100*100mm |
| PCB Thickness | 0.5-5mm |
| System | Windows7 |
| Software | R&D independently |
| Mounting Speed | 150000~180000 CPH |
| Components | LED 3014/ 3020/ 3528/ 5050 and capacitors, resistors, bridge rectifiers, etc. |
| Components Space | 0.5mm |
| Power | 380AC 50 HZ |
| Conveyor Transmission | Max Length :1200 mm |
| Transmission Speed | >500mm/sec |
| Positioning way | Optical |
| Air supply | 0.4-0.6mpa (4-6kgf/cm²) 150N/min |
| X,Y,Z Axis Drive way | High-end magnetic linear motor+ Servo motor |
| No. of Feeders Station | 68 PCS |
| No. of head | 34 PCS |
Features
1. Apply to the 0.6m, 0.9m, 1.2m rigid PCB and 0.5m, 1m LED flexible strip, producing with 4 types materials at the same time with high capacity, available for board with any proportion of LED chip and resistor.
2. Dual arm four module, 17 nozzles for each mounting part, part A or part B can be mounted separately or synchronously.
3. Calibration automatically, high precision, available for RGB.
4. Exclusive patent technology: Group picking and group mount placing.
5. IPC9850 capacity: 200000-250000 CPH
Production line of producing LED tube
Five machines: semi-automatic stencil printer, conveyor, pick and place machine, conveyor, reflow oven
FAQ
- What are the main components the pick and place machine can mount?
It is available for all kinds of components, including LED chip, resistors, capacitors, IC,shaped component and so on.
- Do you provide the complete production line machine?
Yes, of course. We provide the whole production line machine, including solder paste printer machine, conveyor, pick and place machine reflow oven.
- How about the operating software?
Our software is R&D independently by ourselves.
- What advantages does your company have?
We have more than ten years of experience, with a large number of patents, software independent research and development, professional salesman and good after-sales service.
- How long is the period for delivery?
30 days after deposit.
Why Use LED Light Tube Bulbs For Your Place?
The demand for efficient LED Light tube bulbs to light up home and office areas is also increasing at the same pace.
Nowadays LED light tube bulbs serve to be a feasible choice these days due to a number of reasons.
Light Emitting Diodes contain tiny semiconductor chips which convert the electricity into light energy and illuminate the area brightly without much power consumption.
But,what are the benefits of using LED tube light bulbs? These lights can convert most of the electricity to light and hence, they are energy-efficient.
This is a low-power, cost-efficient alternative to the traditional tube lights. They offer a steady and clear stream of light with no flickering.
Since these lights comprise non-toxic gases, they tend to have reduced harmful impact on the environment. The upfront expenses are little higher but operational expenses are negligible as compared to other lights.
These LED light tubes last for 57-75 times longer than other lights and 6-8 times longer as compared to CFLs.
Product Tags:
|
|
Double Motor LED Tube Light Manufacturing Machine 180000 CPH LED SMD Machine Images
|
